Peloton has Bluetooth and can be connected with different devices, for example, smartwatches, headphones, and earbuds. First, however, you must follow some steps to connect the peloton with other devices.
You must be curious about how to connect power beats pro to peloton. First, you need to turn on both devices’ Bluetooth to pair them with each other.
Below I have discussed the whole process of connecting both devices in detail. So, without wasting time, let us start!
Steps to Pair Powerbeats Pro with Peloton
Follow these steps
1. Turn on the Pairing Mode of Powerbeats Pro
For connecting power beats pro to the peloton, make sure that the Bluetooth of your earbuds is turned on. To turn on the Bluetooth, press the power button for a few seconds until the red light of power beats pro flashes.
However, if there is no flashing of the red light due to some issues, press both volume buttons on the earbuds until the red light flashes.
Your device is in pairing mode, so make sure they do not connect with other devices.
2. Turn on the Bluetooth of Peloton
Please turn on the peloton and open its setting. The setting is usually displayed by three dots present at the top right corner of the screen. Here you will see the different options; choose the ‘device setting.’
Click on it, and then a window on the screen with different options. From them, choose the Bluetooth setting on the left side of the screen. Click on it.
Now move the toggle to turn on the Bluetooth.
3. Pair with Powerbeats Pro
When you turn on Bluetooth, a list of available devices will appear on the screen. Find power beats from that list of that devices and connect to them.
Now both devices will start pairing with each other, and within a few seconds, they will be paired.
How to Charge Powerbeats Pro?
Powerbeats pro, when it comes, is already charged and has long battery life. However, after some time, charge them for subsequent use. A lightning cable is in its box, and a charging port is at the back of the case.
Connect the cable to a power source and turn on the electric current.
Follow these steps to charge your power beats pro.
- A magnetic connector inside the case charges both earbuds in the charging case.
- Place the left earbud on the left side and the right earbud on the right side.
- Now insert the cable into the charging case.
- Connect the other source of the cable with the power supply.
- Now earbuds will start charging.
- When LED starts lighting in white color, it means that charging has started.
- Similarly, when the electric supply stops, LED will flash in red, which means that the battery is still less than 40%, and you need to charge them.
How to Fix Powerbeats Pro to Peloton?
Following are the troubleshooting methods you should try if earbuds are not connecting with the peloton
1. Increase the Volume
When no volume comes from the earbuds, we think there is a connection problem. But the volume of the earbuds is too low that we cannot hear it.
So, first of all, check whether the earbud’s volume is high. If the volume is too low, increase the volume to the highest until you can hear all voices.
2. Clean Earbuds and Case
Earbuds are not connecting with the peloton, and you cannot hear anything. So first of all, clean the earbuds and case as dust and debris particles are stuck in the charging pin, which stops the development of the connection between earbuds and peloton.
So take a microfiber or a cotton swab, dip it in the alcohol, and then rub it on the earbuds and slots of the charging case, so all dust and debris particles are removed.
While cleaning the mesh, do not apply too much force to damage the net. In contrast, it is easy to clean the case as it is hard. So hold it in your hand and rub the microfiber on all sides.
Rub until all dust and debris have been removed. For cleaning the charging port, dip a cotton swab in the alcohol and clean it. Never use water to clean such things as water evaporate slowly and damage the internal circuit.
On the other hand, the alcohol evaporates very early, leaving behind a neat and clean surface. You can use the same detergent for cleaning the cable of the charger.
Now completely air dry them and wait until the earbuds are completely dry. Make sure you use a mild detergent to clean AirPods and cases, as harsh chemicals can damage them.
3. Disconnect Powerbeats Pro and Pair it again
Some issues arise in the Bluetooth connection, and both devices disconnect again and again. To resolve this issue, disconnect both devices and pair them again.
Open the setting of Bluetooth devices and remove devices that are already paired. Similarly, remove the power boat pro from the list of paired devices. Now repeat the whole process and again connect the power beats pro.
4. Update Firmware on Powerbeats Pro
When using the outdated version of the powerboats pro, earbuds do not connect. Due to this, connections break again and again.
So, first of all, update the firmware of the powerboats pro. Then, go to the setting and see if a new version is available; update it. Now connect both devices and see if powerboats pro is working or not.
5. Reset Powerbeats Pro
If none of the above methods has started working for you, reset the powerboats pro. The best solution is resetting the powerboats, which solves most problems.
Resetting removes all glitches and bugs that cause different connecting errors. Follow these steps to reset the powerboats pro
- Open the Bluetooth setting of the peloton.
- Next to the powerboats pro, there is an icon.
- Click on it
- Now click on the forget device.
- Then click on the option of click.
- Go back to your powerboats pro case.
- Again place the lid on the case.
- Do not close the lid.
- Now press and hold the system button until the LED flashes in red and white color.
- The Lightning of the LED in red and white indicates that your Bluetooth has been reset.
- Now again, pair both devices.
Now play a sound and check if the volume is coming. All glitches and bugs are removed by resetting; moreover, the setting of Bluetooth is refreshed, and it does not disconnect again and again.
Final Words
In a nutshell, please turn on the Bluetooth of both devices, find the powerboats pro in the list of available devices, and click on them. Now both devices are paired with each other.
If you face issues in connecting both devices to different tricks, sometimes earbuds start working by cleaning. Similar again pairs both devices. But if there is still an issue, reset the earbud’s Bluetooth.
If you still have any queries, feel free to ask in the comment section below. Thank you for your visit!
